Motec C185 Bedienungsanleitung PDF herunterladen (Seite 14)

MoTeC Installation 9

• Use the correct crimping tool for all contacts to ensure a reliable

connection.

• Power the C185 via a separate switch and a 5 ampere fuse, to ensure the

PC can communicate with the C185 without the need to power the rest of

the vehicle.

• The C185 ground must have a direct connection to the vehicle battery.

• C185 is connected to other devices via the CAN bus. Refer to CAN Bus

Wiring Requirements for details.

Connecting Devices

Inputs

Input Types

A range of sensors is available to suit different types of measurement, e.g.

temperatures, pressures, speed. Each type of measurement generates a

different electrical signal that requires a suitable input type.

Each sensor needs to be connected to the type of input designed to suit that

type of sensor.

MoTeC devices have the following input types available:

• Analogue Voltage Inputs

• Analogue Temperature Inputs

• Switch Inputs

• Digital Inputs

• Wheel Speed Inputs

Note: Some inputs require a device upgrade to make them available

In addition to sensors connected to the inputs, the C185 has internal sensors

available for battery voltage, 3-axis G force and device temperature.

Analogue Voltage Inputs

Analogue Voltage inputs are normally used to measure the signals from

analogue voltage type sensors, i.e. sensors with variable voltage outputs,

such as:

o Rotary or linear potentiometers

o Signal conditioned 3 wire pressure sensors

o Thermocouple amplifiers

o Accelerometers

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 84 85

Keine Kommentare

Motec C185 Bedienungsanleitung Seite 14